Generally the model A use Lihuiyu mother board and
laserdraw/coredraw software while model B use
LaserCAD/AUTOCAD/RUIDA and RDworks engraving software. It makes DSP
technology and USB flash disk read and edit file.
1. 3.5 inch Color display screen makes operation easy and friendly
man-machine interface. It has laser cutting head movement control,
output laser power control,engraving speed control, press key then
engraving function, engraving border preview and U disk file
2. It adopts DSP high speed processor which supports USDB 2.0
interface and U flash memory disk read and write file. It is good
for mass engraving or cutting.
3.It has internal memory makes it can separate from PC and
independently set parameters.
4. It has stable high speed cutting and soft velocity variations
performance which realizes no sawtooth shape during high speed
5. Network management makes it communicate with PC easy, security
6. It has auto lifting platform which is good for different
material engraving. The upgrade industrial CO2 laser cutting head
has laser adjustment screw. It can get more accuracy laser optics
path and engraving effect.
7. It also has automatic blowing, auto focus, pedal switch and
security protection function. Also soft/hard coordinate limit
protection is applied.
8. It has power off continued carving, power failure recovery,
processing time prediction, intelligent typesetting and cost budget
9. It supports two laser control function. Each laser power can be
adjusted individually. Also two laser head reciprocal cutting is
applied at this machine.
10.Small circle cutting speed can be flexibly set and improve small
circle cutting effect.
11.Hierarchy data output function is applied. Output power, output
speed,laser mode(engraving,cutting or slope engraving at tach
hierarchy and these data can be saved automatically.
12. Real-time status or track of engraving or cutting and lock
display function are applied on this machine.
13. Gallery has 2000 documents, laser anti-counterfeit fingerprints
and thousands of fronts.
1. Laser power:50W,60W,80W or 100W
2. Max engraving area:600x400mm
3. Max engraving speed:0-60000mm/min
4. Max cutting speed:0-3600mm/min
6. Cutting thickness:0-10cm(depends on material)
7. Working voltage:AC110/220V,50-60Hz
8. Total power:1000W
9. Min character: English 1x1mm
10. Working table: honeycomb or knife strip platform
11.Auto lifting platform: Yes. Lifting range is 0-300mm
12. Rotary clamping tool: Φ10-150x600mm
13.Driving type: Digital subdivision stepper type
14. Location type: Red light
15. Graphic format: BMP,PLT,DST,DXF and AI
16. Driving motor: Stepper motor
17. Cooling method: Forced water cooling and protection system
18. Control software: DSP
19. Compatible software: CoreDraw, AutoCAD and Photoshop
20. Assistant device: Exhaust fan with exhaust pipe
21:Machine size:1260x835x620mm(50W,60Wor 80W)
Apply on jade,MDF,metal,paper,leather,plastic,rubber,crystal and
other non metal material.