Generally the model A use Lihuiyu mother board and
laserdraw/coredraw software while model B use
LaserCAD/AUTOCAD/RUIDA and RDworks engraving software. It makes DSP
technology and USB flash disk read and edit file.
1. 4.3 inch color display screen makes operation easy and f riendly
2. It support USDB 2.0 interface and U flash memory disk read and
write file. It is good for mass engraving or cutting.
3.128M internal memory makes it can separate from PC and
independently set parameters. Good optocoupler make it insulate
from external electromagnetic interference and let it has stable
and reliable engraving.
4. It has stable high speed cutting and soft velocity variations
performance which realizes no sawtooth shape during high speed
5. Network management make it communicate with PC easy, security
6. It only externally connected with different motor drive to
control stepper motor or servo motor.
7. It also has automatic blowing,auto focus,pedal switch and
security protection function. Also soft/hard coordinate limit
protection is applied.
8. It has outage continued carving, power failure recovery,
processing time prediction, intelligent typesetting and cost budget
9. It supports two laser control function. Each laser power can be
adjusted individually. Also two laser head reciprocal cutting is
applied at this machine.
10.Small circle cutting speed can be flexibly set and improve small
circle cutting effect.
11.Hierarchy data output function is applied. Output power, output
speed,laser mode(engraving,cutting or slope engraving at tach
hierarchy and these data can be saved automatically.
12. Real-time status or track of engraving or cutting and lock
display function are applied on this machine.
13. Gallery has 2000 documents, laser anti-counterfeit fingerprints
and thousands of fronts.
1.Laser power:40W or 50W
3.Laser power supply:MYJG-40 40W CO2 power supply
4.Engraving mainboard: CoreLDRAW,etc.
7.Max engraving area:330x210mm
8.Max engraving speed:0-600mm/min
9.Max cutting speed:0-30mm/min
11.Cutting thickness:0-10cm(depend on material)
12.Min engraving accuracy: 0.8x0.8mm,data,English character
13.Eletric l power consumption:1000W
14:Lifting platform type: honeycomb
16.Driving type: Digital subdivision 57 type stepper motor
17. Graphic format: BMP,PLT,DST,DXF,AND,AI
18:Cooling method: Forced water cooling with protection system
Apply on jade,MDF,metal,paper,leather,plastic,rubber,crystal and
other non metal material.